Submersible Pump - (SS/SP)
Oil Field Pump
Material of construction
- Motor body-Non magnetic Stainless steel
- Bearing: No need external lubricants Cable Sealing, Water protecting device to assure
- Cable Sealing : Water protecting device to assure outside Material does not enter into motor
- Journal Bearing : Gun metal bush with 2% nickel and additional Centrifugal Molding process to avoid chance of warm out
- Stator : Insulating warmish using vacuum impregnation method
- Rotor : Aluminum pressure die cast
Pump Details
- Bowl : Glass Filled Noryl
- Impeller : Glass Filled quality abrasion resistance Noryl
- Shaft : Stainless Steel
- Wearing Rings : High Quality abrasion resistance SS
- Seal : Avon makes carbon ceramic seal
- NRV- FG-200 to reduce generated due to back pressure of long pipe line at the of switch off hence leading to increase in tie life of the pump.
- CAUTION Before operating or Installing this pump read this manual and follow all Safety Rules and Operating Instruction
Features
- Starts easily with low voltage.
- Submersible pump set perform wide voltage range.
- Impeller and bowl are made from glass filled noryl that gives strong resistance against sand.
- Higher motor efficiency and lighter body for better performance.
- Products are available with NRV which reduce the thrust load of back pressure.
- Dynamically balanced rotating parts to ensure minimum noise and vibration free operation.
- All CI parts of submersible pump sets are power coated corrosion, durability and alignment.
- All the hardware (including stud nuts) is made of S 304, protecting them from corrosion in hard or sandy water, and makes them easier to repay and reliable
- Motors are filled with high quality grade oil which gives lubrication to bearing too. This improves thermal conductivity which reduces chance of bearing
Performance of Oil Field Submersible Pumps set, 2 Pole 1 Phase 220 V
| Model | HP | KW | Pipe Size | No. of stage | Head in Meters | |||||||||||||
| Discharge in LPM | 0 | 5 | 10 | 20 | 30 | 40 | 45 | 50 | 60 | 65 | 70 | 75 | 80 | |||||
| SS/SP | 1 | 0.75 | 0 | 10 | 105 | 100 | 95 | 83 | 66 | 40 | 20 | 15 | 0 | - | - | - | - | |
| SS/SP | 1.5 | 1.1 | 12 | 12 | 113 | 107 | 100 | 90 | 80 | 66 | 55 | 45 | 20 | 10 | 0 | - | - | |
| SS/SP | 2 | 1.5 | 15 | 15 | 115 | 110 | 105 | 97 | 87 | 73 | 66 | 58 | 40 | 32 | 20 | 10 | 0 | |
Submersible pump Set - (SS/SP)
Water Field Submersible Pump
Material of construction
- Motor body-Non magnetic Stainless steel
- Bearing: No need external lubricants Cable Sealing, Water protecting device to assure
- Cable Sealing : Water protecting device to assure outside Material does not enter into motor
- Journal Bearing : Gun metal bush with 2% nickel and additional Centrifugal Molding process to avoid chance of warm out
- Stator : Insulating warmish using vacuum impregnation method
- Rotor : Aluminum pressure die cast
Pump Details
- Bowl : Glass Filled Noryl
- Impeller : Glass Filled Noryl quality abrasion resistance
- Shaft : Stainless Steel
- Seal : Avon makes carbon ceramic seal
- NRV- FG-200 to reduce generated due to back pressure of long pipe line at the of switch off hence leading to increase in tie life of the pump.
- CAUTION Before operating or Installing this pump read this manual and follow all Safety Rules and Operating Instruction
Features
- Starts easily with low voltage.
- Submersible pump set perform wide voltage range.
- Impeller and bowl are made from glass filled noryl that gives strong resistance against sand.
- Higher motor efficiency and lighter body for better performance.
- Products are available with NRV which reduce the thrust load of back pressure.
- Dynamically balanced rotating parts to ensure minimum noise and vibration free operation.
- All CI parts of submersible pump sets are power coated corrosion, durability and alignment.
- All the hardware (including stud nuts) is made of S 304, protecting them from corrosion in hard or sandy water, and makes them easier to repay and reliable
- Motors are filled with high quality grade oil which gives lubrication to bearing too. This improves thermal conductivity which reduces chance of bearing
Performance of Oil Field Subersible Pumps set, 2 Pole 1 Phase 220 V
| Model | HP | KW | Pipe Size | No. of stage | Head in Meters | |||||||||||||
| Discharge in LPM | 0 | 5 | 10 | 20 | 30 | 40 | 45 | 50 | 60 | 65 | 70 | 75 | 80 | |||||
| SS/SP | 1 | 0.75 | 0 | 10 | 105 | 100 | 95 | 83 | 66 | 40 | 20 | 15 | 0 | - | - | - | - | |
| SS/SP | 1.5 | 1.1 | 12 | 12 | 113 | 107 | 100 | 90 | 80 | 66 | 55 | 45 | 20 | 10 | 0 | - | - | |
| SS/SP | 2 | 1.5 | 15 | 15 | 115 | 110 | 105 | 97 | 87 | 73 | 66 | 58 | 40 | 32 | 20 | 10 | 0 | |
